| |

|
| |
Description
Rigging certificate and serial number
Downloads
User's feedback
Register you Article 02
Become a
reseller
Become
a manufacturer
Extra: outdoor photo session
|
|
|
| |
Description |
| |
Article 02 is:
- made of a single
sheet of flexible, shockproof, ultrathin
transparent material
- given tridimensional
shape, actual wing and body airfoil profiles
- balanced in weight
and shape according to the enclosed rigging certificate
and it is ready for
free flight indoor use
Article 02 is entirely
designed and manufactured by Aerial Creatures & Cognitive
Integration
revenues from
02 are used to finance main
R&D activities
|
Origin:
It came to reality as
a spin off from Article 01 (a suggestion from Felipe) and through
a determination and a manufactoring process dign to german skunk
works standards under the stressful end days of WWII . Muriel
provided resources and induced most of the determination i used
to fix this thing: Muriel j'arriverai jamais te remercier pour
l'aide qui tu m'as donne dans cette situation absurde
Technical description:
Pitch stability
comes through wings and body carrying actual profiles: they
are not planar. Directional stability comes through sweep and
dihedrals. Shape is maintained by air pressure. It is a full
laminar flow/low Reynolds model intended for indoor flying,
but you can use it outside strictly under no wind conditions.
Artistical
description:
Holding this
jelly/elastic thing in your hand, launching and starving as
the magic happens (it's sliding through the whole
available space) can change your mood for a whole week:
such a thing EXISTS, life MUST be nice. Let's do it again!
Shockproof
note:
BTW, the
thing is less delicate than you may think. I've seen her jamming
against any sort of sharp and nasty objects, go pick her up
and find her nonchalantly perfect. She's just folding during
the whole crash...
Each model
holds unique serial number, is fully tested and
rigged. Comes with a User's manual, a rigging
certificate signed by yours truly and a foamy envelope.
Buy
it
Video
showing model geometry, amazing elastic deformation, trimming
technique, launching technique .avi
.wmv


Trimming
Article 02 (from User's Manual)
Serial
008 to 013 all lined up on the tarmac ready for squadron delivery
:-)
|
| |
|
|
|
| |
Rigging
certificate and serial number |
| |
 
- Each Article 02 comes
stamped with Aerial Creatures & Cognitive Integration logo
and its own serial number
- Each Article 02 is rigged
in weight, balance & shape, in order to ensure it fulfills
design specifications. A rigging certificate is therefore issued,
listing explicit rigged parameters, date and place of manufactoring,
date and place of rigging. Finally, the certificate is signed
black ink on white paper by the rigger, usually me.
Therefore, serial number
and rigging certificate identify an unique Article 02 |
| |
|
|
|
| |
Downloads |
| |

User's manual in English
and Spanish, in .pdf format. Version 1.1 JAN 2006 |

Rigging certificate
(blank form) in .pdf format
|
|
|
|
|
| |
User's
feedbacks |
| |
From Martin,
30-12-2005
"Hola,
te escribo en castellano porque ayer me hablaste en castellano.
Una amiga y Yo (Martin) te compramos un avioncito-pajaro transparente
#003 lo amamos!! es demasiado lindo y ademas vuela!! Nos gustò
mucho, y tù muy simpatico, nos alegraste aun mas la tarde.
Muchas gracias jajaja.
(...)
Martin"
transl.
"Hi,
i'm writing in spanish as you were talking spanish yesterday.
A friend and me (Martin) bought a trasparent bird-model airplane
#003 from you, we love it!! It's too nice and it 's even flying!!
We loved it so much, and you were so kind too, you've delighted
our afternoon. Thank you so much jajaja
(...)
Martin"
Article 02 serial No 003
is the very first Article and the very first money I've made with
a product of my activity: Aerial Creatures & Cognitive Integration.
I sold it to Martin and his friend in a micro, an urban
bus in the chaotic Santiago de Chile, as it was driving on a main
street called Providencia. Later on I'll add a proper commentary
to this historical event. |
|
|
| |
Register
your Article 02 |
| |
Just write me with the serial
number of your 02 and you will be posted with service bulletins
concerning 02 improvements, etc.
Registering your serial
number will help maintaining an online archive of 02 users. Kind
of nice and peculiar
So far (23-01-2006), the
register stands as follows
| S/N |
manufactured |
owner |
current
location |
notes |
| X02 |
28-12-2005 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
Prototype |
| 001 |
29-12-2005 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
From 001 to 004: pre-serie
with cut-out ventral grip and marker handwriting, 0.18 gr
counterweight balls |
| 002 |
29-12-2005 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
|
| 003 |
29-12-2005 Usines Gerbault |
Martin |
?? (Santiago??) |
sold on a micro in
Santiago. first ever product sold by Aerial Creatures&
Cognitive Integration |
| 004 |
29-12-2005 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
|
| 005 |
30-12-2005 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
From 005 to 007: 3M
tape ventral grip replaces the cut-out. 005 has carried out
most of the test flying for the preserie |
| 006 |
30-12-2005 Usines Gerbault |
Daniel |
Algarrobo, Chile |
The star of "outdoor
photo session" portayed at the bottom of this page |
| 007 |
??-01-2006 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
used intensively in
flight testing at Usines Gerbault |
| 008 |
15-01-2006 Usines Gerbault |
mrk |
Parte y Pieza reseller,
Santiago |
From 008 on actual
serial production featuring:
AC&CI logo stamped, S/N handwritten with marker, 1 single
0.8 gr counterweight, improved tail tips bending from mold |
| 009 |
15-01-2006 Usines Gerbault |
mrk |
Parte y Pieza reseller,
Santiago |
|
| 010 |
15-01-2006 Usines Gerbault |
muriel/mrk |
Usines Gerbault, Santiago |
Model with outstanding
flight characteristics, kept under observation to improve
production |
| 011 |
15-01-2006 Usines Gerbault |
sold by Parte y Pieza |
??? |
product not registered |
| 012 |
15-01-2006 Usines Gerbault |
mrk |
Parte y Pieza reseller,
Santiago |
|
| 013 |
15-01-2006 Usines Gerbault |
mrk |
Parte y Pieza reseller,
Santiago |
Used as stand/gate
guardian/flight trials @ Parte y Pieza |
| 014 |
to be manufactured |
|
|
|
| |
|
|
|
|
|
|
|
| |
Buy/Resellers |
| |
Article
02 sells from resellers. You can also buy it from me (write
an email
to buy) at 10 euro + shipping fees everywhere in the world.
You're welcome to serve from where it best suits you.
Resellers
(update 06-02-2006)
|
|
|
|
| |
Become
a reseller |
| |
As far as you like Article
02 and you feel you want to sell this thing to people, you can
be a reseller: no matter where you are in the world, no matter
what your activity is. I will provide you with a standard set
of virtual/real tools that you can use to sell 02 at your convenience.
Convenience means that you are free to promote 02 however you
like, provided i approve it.
The set includes
- This webpage and all
the downloadable information contained in it (video, manual,
etc.)
- Any special request you
may have (peculiar photographs, promotional material, etc.)
- A stand including some/all
of the items portrayed in the photo below

Write
me for more details and agreements
|
|
|
| |
Become
a manufacturer |
| |
Waw!
Ok. See Aerial
Creatures & Cognitive Integration policies for entering in
partnership. You will discover
that I'm open to sharing my activity up to the maximum levels.
I'm not jealous. I
will share with you the technological process, toolings and know
how needed to manufacture Article 02 (or other similar products)
and -above all- to make them fly correctly.
Write
me for more details and agreements
|
|
|
| |
Extra:
outdoor photo session |
| |
On Dec 30, 2005, just back
on the coast from Santiago, i took 006 out for a ride. It was
late in the afternoon and there was no wind at all. Have at it





Article 02
is juste le bonjour qui vous arrive de Aerial Creatures &
Cognitive Integration
back
to Articles & Gadget |
|